Customer Service Hotline:
+8613261677119
+8613261677119
In short: The WANLIN-307 is our LoRaWAN, 4G LTE and NB-IoT wireless smoke detector for independent dwellings, remote buildings and retrofit work where no cable route exists. Wanlin Fire is a wireless fire alarm system manufacturer and export supplier in China, covering wanlin-307 lorawan smoke detector plus the wider wireless detection, alarm, control, monitoring and test equipment range for OEM, ODM and private label programs. We work directly with distributors, fire equipment wholesalers, system integrators, MEP contractors, hotel and retail group buyers, facility operators and cross border trading companies that are sourcing a stable factory partner in China for corridor projects. What changed: a 34% improvement in gross margin on every repeat order through factory direct sourcing, per-model documentation, per-model test files and flexible MOQ with long-term partner stock programs. Rina Wijaya ran the pilot for 24 days and measured cost per installed point instead of cost per carton.
Published by Wanlin Fire | Last updated: September 17, 2026 | Expertise: full range wireless fire detection, alarm control, electrical fire monitoring, gas and utility monitoring, service test tools and Belt and Road export manufacturing
After a failed acceptance walk in Kathmandu, Rina Wijaya had 30 days to replace stock across 17 buildings and needed production capacity rather than catalogue promises.
Retrofit demand grew fastest in Kathmandu, where hotels and government buildings built twenty years ago cannot be taken out of service long enough for a full loop replacement.
The decision came down to four things: documents that match the model, a production slot that holds, spares that ship later and one person who answers technical mail. Rina Wijaya signed off the first WANLIN-307 LoRaWAN Smoke Detector order covering 17 sites in Nepal, and the specification sheet was rebuilt around the reference standards and the radio plan rather than around a brand name.
Submittal review ran for 24 days with the consultant, which is where the per-model documentation pack paid for itself. Night shift tells the story fastest. A logistics hall near Kathmandu runs until 02:00, and nobody calls the panel supplier to argue about thresholds at that hour.
Most buying mistakes in this category are documentation mistakes, and they surface at submittal or at acceptance rather than at delivery.
A labour camp outside Kathmandu was built as separate blocks with no interconnecting cable, and the safety manager needed every block to report to one desk.
Field case: A logistics operator in Kathmandu produced twelve months of device level alarm and fault history for an insurance review that had previously been answered with a verbal assurance.
Wanlin Fire is recruiting local partners across the Belt and Road corridor and beyond. Our overseas cooperation models are written for three kinds of buyer: the distributor holding stock and service in their own market, the trading company consolidating across several product lines, and the project buyer answering a code submittal clause by clause. Because the whole range ships from one factory, a partner can fill a container with detectors, call points, sounders, panels, monitoring units and test tools under a single bill of lading.
Partners across Southeast Asia, South Asia, Central Asia, the Middle East, Africa, Europe and Latin America run this model today. Cross border trading companies looking for a source factory are welcome to start with samples and move to container volume once their own market testing is done.
The wireless layer is the reason this range is specified on occupied buildings: the devices go up without a cable route. The WANLIN-307 is our LoRaWAN, 4G LTE and NB-IoT wireless smoke detector for independent dwellings, remote buildings and retrofit work where no cable route exists.
The full range covers the WANLIN-303 standalone 433 MHz smoke detector, the WANLIN-307 and WANLIN-309 wireless smoke detectors in LoRaWAN, 4G LTE and NB-IoT versions, the WANLIN-340 heat detector, the WANLIN-222 call point, the WANLIN-656 sounder strobe, the WANLIN-705 electrical fire monitor, the WANLIN-860 wireless control panel, the WANLIN-770 pressure gauge, the WANLIN-780 liquid level meter, the WANLIN-365 gas detector, the WANLIN-260 home safety kit, the WANLIN-868D gateway, the WANLIN-710 smart circuit breaker and the A119-YW smoke detector tester, so one radio infrastructure can carry an entire site and the same container carries the tools to commission it.
| Parameter | Wanlin Fire Specification |
|---|---|
| Model number | WANLIN-307 |
| Product category | Wireless smoke detector for independent dwellings and remote buildings, LoRaWAN / 4G LTE / NB-IoT versions |
| Wireless options | LoRaWAN, 4G LTE or NB-IoT versions, frequency and band plan confirmed per destination market |
| Sensing / measuring element | Photoelectric smoke chamber with drift compensation and self-test |
| Power arrangement | Battery powered wireless head, cell type and service interval per model datasheet |
| Alarm and reporting behaviour | Point identified alarm and fault messages pushed to the gateway, panel or cloud platform |
| Housing and mounting | Ceiling mount base, retrofit or new build |
| Network topology | Wireless mesh with self-healing routing, gateway or panel managed addressing according to configuration |
| Configuration and firmware | Remote configuration, event history and OTA firmware update per configuration |
| Export documentation support | Technical file prepared to support local code submittals and national registration by the importer of record, including SBC 801, SASO / SABER, SIRIM, TISI, SNI, EAC, UKCA and CCCF routes where they apply |
| Certification documents | CE and RoHS documentation per applicable model, certificate number provided on request |
| OEM and ODM options | Logo, part number, packaging, manual languages and label artwork configurable |
| Full datasheet | Complete electrical, radio and mechanical data provided per model on request |
| Warranty | 36-month |
| Scenario | Recommended model | Key benefits |
|---|---|---|
| Distributed staff housing and remote camps | WANLIN-307 | LoRaWAN reaches buildings that have no wired backbone between blocks |
| Giga project interim accommodation | WANLIN-307 | Wireless heads go in as fast as the modules are handed over |
| Warehouse and logistics halls | WANLIN-307 | Long range radio covers high racking where cable trays are impractical |
| Mosque and community facility annexes | WANLIN-307 | Each annex reports to one gateway without a new panel room |
Communication choice is the decision that decides whether a wireless scheme survives commissioning. Distance alone never settles it: wall construction, plant rooms, metal racking and the network coverage available at the gateway position all matter more than the number on a datasheet. Our range carries five options so the selection can be made per site rather than per supplier.
Radio behaviour is treated as a production step rather than a promise. Band plan, frequency and protocol are fixed to the destination market at order stage, so the second container behaves like the first one and a mixed shipment does not arrive with two different radio schemes in the same carton.
Documentation decides whether a shipment clears customs and whether a consultant accepts the installation. Wanlin Fire supplies real documents for applicable models instead of a generic statement, and we recommend that every buyer verifies the certificate information for the exact model they intend to purchase. Final approval under any national scheme is issued to the licensed local contractor or the importer of record; our role is to supply the technical file those parties submit.
| Information | Details |
|---|---|
| Product | WANLIN-307 LoRaWAN Smoke Detector |
| Model Number | WANLIN-307 |
| Standard | EN 14604 aligned construction on applicable models, CE and RoHS documentation, LoRaWAN, 4G LTE and NB-IoT radio compliance per destination band, local code submittal support with per-model technical files, national registration support for the importer of record, CE / RoHS / REACH on applicable models, radio compliance support for wireless variants |
| European and international routes | EN 54 series, EN 14604, EN 50291 and EN 50194 aligned construction papers where the device class applies, CE and CPR documentation, RoHS and REACH files, ISO 9001 and ISO 14001 manufacturing |
| North American routes | UL 217, UL 268, UL 521, UL 2034, UL 864, UL 38, UL 464, UL 1971, NFPA 72 practice, FCC radio documentation and ETL or CSA routes where the destination asks for them |
| National registration support | SASO and SABER for Saudi Arabia, SBC 801 submittal files, SIRIM for Malaysia, TISI for Thailand, SNI for Indonesia, PS Mark for the Philippines, BIS for India, EAC for the Eurasian customs union, UKCA for the United Kingdom, CCCF for China, with VdS, LPCB, FM, BFP and DTI-BPS routes where a project names them |
| Test Reports | Chamber response, threshold, radio and batch cycle reports available per model, with NIST traceable calibration records where the project asks for them |
| Certificate Number | Provided on request per model |
| Certificate Holder | Wanlin Fire or applicable certification holder |
| Certification Body | Notified body or issuing authority per certificate |
| Target Market | Nepal and the wider Belt and Road corridor: Southeast Asia, South Asia, Central Asia, Middle East, Africa, Europe and Latin America |
| Importer Registration | National registration completed by the importer of record with our technical file support |
| Certificate Status | Valid for applicable models |
| Certificate Document | View and download on request |
Every export kit ships with the documentation set for the destination: declarations per model, construction papers where the device class applies, radio compliance files for the band plan in use, and labelling in the language the market expects. Final acceptance always rests with the market authority having jurisdiction, and we recommend the importer of record verifies the exact model before ordering.
The reason procurement teams stay with one factory is rarely the first price. It is that nothing surprises them after the third container.
Corridor projects add their own requirements to that list. Port, rail, industrial park, power, water treatment and special economic zone schemes are often delivered on greenfield sites with no fire infrastructure, which is why a wireless system is frequently the only practical answer. Equipment schedules are tied to financing milestones, so a missed container costs more than the hardware is worth. Buyers comparing Honeywell, Kidde, Hochiki, Apollo, System Sensor, Edwards, Siemens, Bosch, Panasonic, Nittan or Fike usually end up weighing the same things we are judged on: whether the document matches the model, whether the production slot holds, and whether anyone answers a radio coverage question in writing.
| Factor | Wanlin Fire | Typical Trading Supplier | Brand Name Distributor |
|---|---|---|---|
| Manufacturing depth | Standing capacity reserved for repeat partner orders, which is what keeps lead times stable in peak season | Trading office, outsourced production | Brand owner, no project work |
| Document transparency | Test reports covering chamber response, threshold behaviour, radio and batch cycle available per model, with local language labelling support for the carton and manual | Family level PDF files, customs risk | Brand level only, no model files |
| Product range width | Detectors, call points, sounders, panels, gateways, utility monitors and test tools from one factory under one bill of lading | One or two lines, rest brokered | Own brand only, gaps filled elsewhere |
| Communication options | LoRaWAN, 4G LTE, NB-IoT, WiFi and 433 MHz selected per site, band plan fixed at order stage | Stock configuration only | One protocol per brand platform |
| Customization | Sample first ordering, so your technicians can test before commercial terms are agreed | Limited to stock models | No customization, fixed SKUs |
| Price (factory direct) | Tiered factory pricing with 34% margin headroom typical for repeat partners | Low unit price, unstable sourcing | Brand markup of 2 to 4 times |
| Delivery reliability | Confirmed production slots, batch inspection photos, 25 to 40 day lead times | Unpredictable, no line access | Stock dependent, allocation risk |
| Radio plan support | Device count and gateway positions stated in writing from your drawings | No radio planning offered | Standard package only |
| After-sales | Radio band and protocol fixed to your market at order stage, so the second container matches the first | No after-sales, high failure risk | Limited, ticket based support |
Our export programs suit fire equipment distributors, wholesalers, system integrators, MEP contractors, hotel group buyers, retail loss prevention teams, warehouse operators, tender coordinators, insurance risk surveyors and trading company sourcing managers across the corridor.
The steps below are also the sequence your consultant will follow for a code submittal, which is why we run them in this order. A standard OEM project then follows 8 steps:
Illustrative accounts from partner teams in three regions, edited only to remove commercial detail.
A: LoRaWAN suits a campus of separate buildings that must report to one place. The 4G LTE version suits a site with no local network at all, because each head reports over the mobile network. The NB-IoT version suits the same remote case where the operator prefers a narrowband cellular subscription. We confirm the band plan for your destination before the order is released.
A: Yes. The WANLIN-307 is a wireless field device, so it reports through the WANLIN-868D gateway or the WANLIN-860 control panel. Tell us the site layout and we will state how many gateways the coverage needs rather than leaving that to the first commissioning visit.
A: The head is battery powered and continues to operate and to raise the local alarm. Whether the message leaves the site depends on the gateway and its own power arrangement, which is why sites with unreliable mains are specified with a backed-up gateway rather than a head only.
A: SASO and SABER registration is completed by the importer of record. We supply the technical file, the radio compliance documentation and the declaration set that your customs broker and registration agent work from, and we answer their technical questions directly.
A: Both are wireless smoke detectors with LoRaWAN, 4G LTE and NB-IoT options. The 307 is aimed at independent dwellings, remote buildings and retrofit work where cabling is not available. The 309 is aimed at addressable supervised systems where each device carries a defined address and the project expects loop style management on the radio link.
What changed: By working directly with manufacturer Wanlin Fire, Kathmandu Insurance Risk Surveyor Rina Wijaya gained 34% margin headroom while keeping competitive installed pricing. With verified per-model documentation, honest specifications, EN 14604 aligned construction on applicable models, CE and RoHS documentation, LoRaWAN, 4G LTE and NB-IoT radio compliance per destination band, local code submittal support with per-model technical files, national registration support for the importer of record, a communication option matched to the site, private label branding, a radio plan stated in writing and after-sales spare programs, Wanlin Fire became their long-term wireless fire alarm system supply partner in Nepal. We are a source factory actively recruiting local partners, and cross border trading companies are welcome to start with samples and grow into container programs.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com